FL 1.01x FLATTENER (FSQ-85ED)

FL 1.01x FLATTENER (FSQ-85ED)

FL 1.01x FLATTENER (FSQ-85ED)

TAKAHASHI

Although the Takahashi FSQ-85EDX is designed as a Petzval quadruplet, the full-format sensor coverage was not perfect and the edge of the field suffered from a slight astigmatism typical of this optical system. Takahashi offers a dedicated corrector to correct this defect and thus offer results close to those of the FSQ-106ED.

264,17 €

Διαθέσιμο με Προπαραγγελία

Διαθέσιμο με Προπαραγγελία

Στην περίπτωση αυτή περιλαμβάνονται προϊόντα που συνήθως δεν κρατάμε σε στοκ και για κάποιους λόγους - που δεν εξαρτώνται από την εταιρία μας - ΔΕΝ μπορούν να είναι διαθέσιμα σε διάστημα μικρότερο των 14 ημερών.Στην κατηγορία αυτή περιλαμβάνονται και προϊόντα που προδιαφημίζονται από τους κατασκευαστές αλλά δεν άρχισε ακόμη η επίσημη διανομή τους στην ελληνική αγορά. Πιθανόν για τα είδη αυτά να παρέχεται δυνατότητα προπαραγγελίας με ειδική προνομιακή τιμή. Αν γνωρίζουμε ήδη την πιθανή ημερομηνία άφιξης του συγκεκριμένου προϊόντος, στις αποθήκες μας, τότε αυτή θα αναγράφεται ξεχωριστά και επάνω από την ένδειξη «Διαθέσιμο με Προπαραγγελία»

Διαθεσιμότητα: Σε απόθεμα
SKU
TAK-TKA37582


FL 1.01x FLATTENER (FSQ-85ED)


With the continuous development of DSLRs and CCD/CMOS cameras, more and more astrophotographers are equipping themselves with imaging systems with large, full-format, small-pixel sensors. This change is a real challenge for conventional refractors, most of whose lenses have been designed to best cover the APS-C format. Although the Takahashi FSQ-85EDX is designed as a Petzval quadruplet, the full-format sensor coverage was not perfect and the edge of the field suffered from a slight astigmatism typical of this optical system. Takahashi offers a dedicated corrector to correct this defect and thus offer results close to those of the FSQ-106ED. The field is perfectly corrected on a diameter of 44 mm. The flattener causes the focal length of the FSQ-85EDX to be slightly increased (by a factor of 1.01x) from 450 mm (F/5.3) to 455 mm (F/5.4).

The flattener has a M72x1 male thread on the telescope side and a M54x0.75 female thread on the camera side. The required backfocus behind the corrector is 56.2 mm. A female thread at the front accepts filters with an M58 thread.

Diagram of the focal point position and threads of the Takahashi FL1.01X field corrector

Spot-diagram of Takahashi FSQ-85EDX refractor with FL1.01X field corrector

Τεχνικά Χαρακτηριστικά
Καθ.Βάρος (γρ.) 200
  • Image circle diameter: 44 mm
  • Metal back distance: 56.2 mm
  • Input mechanical interface: M72x1 thread, male
  • Output mechanical interface: M54x075 thread, female
  • Backfocus: 36 mm
  • Diameter: 80 mm
  • Total length: 41 mm

Γράψτε τη Δική σας Αξιολόγηση
Μόνο οι εγγεγραμένοι χρήστες μπορούν να γράψουν αξιολογήσεις. Παρακαλώ, συνδεθείτε ή δημιουργήστε ένα λογαριασμό